Making Calls With One-Touch Dialing - Sony SPP-SS960 Manual De Instrucciones

One-touch dialing (continued)
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 3 and have not pressed
(PGM/VOL) (step 4) yet, just turn Jog Dial down to erase it. Then enter the
correct number.
• You may press Jog Dial instead of (PGM/VOL) in step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 3 on page 17, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (PAUSE).
To change a stored number
1
Press (PGM/VOL).
2
Press one of the ONE-TOUCH DIAL buttons ((A) to (C)).
The current number appears on the display.
3
Turn Jog Dial down to erase the current number.
4
Enter a new number.
5
Press (PGM/VOL).
Note
You can replace the stored number with a new number, but you can't just erase it.

Making calls with one-touch dialing

1
Press (TALK) and wait until "TALK" appears on the display.
2
Press one of the ONE-TOUCH DIAL buttons ((A) to (C)).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the handset isn't in use, press one of the ONE-TOUCH DIAL
buttons ((A) to (C)).
The number stored on the button appears on the display for five
seconds. To dial the number, press (TALK) while the number is
displayed.
EN
18
Telephone Features