dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 17

COMPACT 3.0
3 Place brackets between the upholstery and the
cabin roof, as shown.
4
CABIN EXTERIOR:
Position the Compact in the hatch gap.
Caution! When positioning the unit above the
hatch gap, check that the wastewater run-offs
are not blocked by the EPDM seal.
5
Position the foam rubber, ensuring the softest part
is placed on the base of the unit.
3
17
EN
®
4
Hatch
5