dirna Bergstrom bycool COMPACT 3.0 Instrucciones De Montaje página 19

COMPACT 3.0
8
Position the interior air distribution panel on the
front hexagons and secure with (4) M6 nuts with a
washer and (4) F-F L=45 hexagons, tightening to
the maximum.
Important: The interior air distribution panel
duct must come up against the unit's upper
foam in order to prevent any leakages of air.
8
EPDM
seal
L=43 M-M Hexagon
Cabin roof
Upholstery
L=45
9 Screw (4) L=26 hexagons in the inserts in the base
of the unit with a rubber washer and a flat washer,
and tighten with a torque of 12.7±10% Nm.
Compact Base
M6 nut with
washer
F-F Hexagon
8
Interior air distribution panel
9
19
EN
®
Foam