NEC MultiSync LCD1990SXp Manual Del Usuario página 19

Advanced OSM Controls
Tag 2 R-H. POSITION
(Analog input only)
G-H. POSITION
(Analog input only)
B-H. POSITION
(Analog input only)
R-FINE
(Analog input only)
G-FINE
(Analog input only)
B-FINE
(Analog input only)
R-SHARPNESS
(Analog input only)
G-SHARPNESS
(Analog input only)
B-SHARPNESS
(Analog input only)
DVI LONG CABLE
(Digital input only)
Tag 3 AUTO ADJUST
(Analog input only)
SIGNAL ADJUST
(Analog input only)
Adjusts the position of the RED component of the image.
Press "Left" or "Right" to adjust.
Adjusts the position of the GREEN component of the image.
Press "Left" or "Right" to adjust.
Adjusts the position of the BLUE component of the image.
Press "Left" or "Right" to adjust.
Adjusts the "FINE" setting of the RED component of the image.
Press "Left" or "Right" to adjust.
Adjusts the "FINE" setting of the GREEN component of the im-
age. Press "Left" or "Right" to adjust.
Adjusts the "FINE" setting of the BLUE component of the image.
Press "Left" or "Right" to adjust.
Adjusts the "SHARPNESS" setting of the RED component of the
image. Press "Left" or "Right" to adjust.
Adjusts the "SHARPNESS" setting of the GREEN component of
the image. Press "Left" or "Right" to adjust.
Adjusts the "SHARPNESS" setting of the BLUE component of the
image. Press "Left" or "Right" to adjust.
Compensates for image degradation caused by using a long
DVI cable. There are 4 possible settings, with "0" being the
lowest level of compensation and "3" being the highest level.
The default setting is "1".
Automatically adjusts the Image Position, H. Size, and
Fine settings.
Determines what settings are adjusted when Auto Adjust is
performed. The choices are "SIMPLE" and "FULL".
Press "Left" or "Right" to select.
H-size, Fine, H/V Position
SIMPLE
FULL
O: Automatic Adjustment X: No Automatic Adjustment
NOTE: Automatic Adjustment does not work at
resolutions less than 800 x 600 resolution.
17
- continued
O
O
Contrast
X
O