NEC MultiSync LCD1990SXp Manual Del Usuario página 27

Advanced OSM Controls
Tag A TILE MATRIX
Tag B DATE & TIME
Tag C SCHEDULE
The "TILE MATRIX" feature allows one image to be displayed
over multiple screens. This feature can be used with up to 25
monitors. (5 horizontal x 5 vertical)
Using the Tile Matrix function requires the PC output signal to
be sent through a distribution amplifi er to each of the individual
monitors.
ENABLE: Select "ON", to expand the signal to the selected TILE
MATRIX settings.
H MONITOR: Selects the number of horizontal displays.
V MONITOR: Selects the number of vertical displays.
MONITOR NO.: Selects a position to expand the screen.
TILECOMP: Works in tandem with "TILE MATRIX" to
compensate for the bezel width of the tiled monitors in order to
accurately display the image.
TileComp using 4 monitors (black area shows monitor frames).
monitor1
monitor3
TileComp OFF
The EXPANSION mode will be set to "FULL" when the "TILE
MATRIX" is activated.
Sets the current date and time for the internal clock.
Date and Time has to be set in order for the "SCHEDULE"
feature to work properly.
DAYLIGHT SAVING: For those timezones where Daylight
Saving Time (Summertime) is observed.
Programs the monitor's working schedule. Sets the hour and
day of the week when the monitor powers on or off. Also sets
the input port. Select "EXIT" to set schedule.
Using the "SCHEDULE" function allows you to set up to seven
different scheduled time intervals when the LCD Monitor will
be activated. You can select the time the monitor turns on and
turns off, the day of week the monitor is activated, and which
input source the monitor will use for each scheduled activation
period. A check mark in the box next to the number of the
schedule indicates that the selected schedule is in effect.
25
- continued
monitor1
monitor2
monitor4 monitor3
TileComp ON
monitor2
monitor4