Pausing Cd Playback; Selecting The Search Method; Searching Every 10 Track In The Current; Disc - Pioneer DEH-P77MP Manual De Instrucciones

Section
06 Built-in CD Player
1 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
2 Press ROTARY ENCODER to turn scan
play on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
SCAN :ON (on)SCAN :OFF (off)
! SCAN :ON  The first 10 seconds of each
track is played.
! SCAN :OFF  The track will continue to
play.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2 Press ROTARY ENCODER to turn pause
on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
PAUSE :ON (on)PAUSE :OFF (off)
! PAUSE :ON  Play of the current track
pauses.
! PAUSE :OFF  Play will resume at the same
point that you turned pause on.
22
En

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
track.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH SRCH has been
previously selected, ROUGH SRCH will be dis-
played.
2 Rotate ROTARY ENCODER to select the
search method.
Rotate ROTARY ENCODER until the desired
search method appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH SRCH  Searching every 10
track
Searching every 10 track in
the current disc
If a disc contains over 10 tracks, you can
search every 10 track. When a disc contains a
lot of tracks, you can roughly search the track
you want to play.
1 Select the search method
ROUGH SRCH.
Refer to Selecting the search method on this
page.
2 Rotate and hold ROTARY ENCODER to
search every 10 track in a disc.
# If a disc contains less than 10 tracks, rotating
and holding clockwise recalls the last track of a
disc. Also, if the remaining number of tracks after
searching every 10 tracks are less than 10, rotat-
ing and holding clockwise recalls the last track of
a disc.