Other Functions; Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer DEH-P77MP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section
13

Other Functions

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 44.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1
After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2
Press 1 numbered button to select the
desired character type.
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)
# You can select to input numbers and symbols
by pressing 2 numbered button.
3
Rotate ROTARY ENCODER to select a
letter of the alphabet.
Rotating ROTARY ENCODER clockwise will
display a letter of the alphabet in A B C ... X Y
Z, numbers and symbols in 1 2 3 ... | } ¯ order.
Rotating ROTARY ENCODER counterclock-
46
En
wise will display a letter in the reverse order,
such as Z Y X ... C B A order.
4
Press ROTARY ENCODER to move the
cursor to the next character position.
When the letter you want is displayed, press
ROTARY ENCODER to move the cursor to the
next position and then select the next letter.
5
Move the cursor to the last position by
pressing ROTARY ENCODER after entering
the title.
When you press ROTARY ENCODER one
more time, the entered title is stored in mem-
ory.
6
Press BAND to return to the playback
display.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido