Playing Tracks In A Random Order; Scanning Folders And Tracks - Pioneer DEH-P77MP Manual De Instrucciones

Section
07 MP3/WMA Player
2 Rotate ROTARY ENCODER to select the
repeat range.
Rotate ROTARY ENCODER until the desired
repeat range appears in the display.
! FOLDER  Repeat the current folder
! TRACK  Repeat just the current track
! DISC  Repeat all tracks
Notes
! If you select other folder during repeat play,
the repeat play range changes to DISC.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
FOLDER and DISC.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select RANDOM.
Press FUNCTION until RANDOM appears in
the display.
3 Press ROTARY ENCODER to turn ran-
dom play on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
RANDOM :ON (on)RANDOM :OFF (off)
! RANDOM :ON  Tracks will play in a ran-
dom order within the presently selected
FOLDER or DISC ranges.
! RANDOM :OFF  Tracks will continue to
play in order.
26
En
Note
If you turn random play on during FOLDER and
then return to the playback display, F-RANDOM
appears in the display.

Scanning folders and tracks

While you are using FOLDER, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using DISC,
the beginning of the first track of each folder
is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
3 Press ROTARY ENCODER to turn scan
play on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
SCAN :ON (on)SCAN :OFF (off)
! SCAN :ON  The first 10 seconds of each
track of the current folder (or the first track
of each folder) is played.
! SCAN :OFF  The track (or folder) will con-
tinue to play.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Notes
! After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during FOLDER and
then return to the playback display, F-SCAN
appears in the display.