Section
11
Audio Adjustments
3
Rotate ROTARY ENCODER to select cut-
off frequency.
Rotate ROTARY ENCODER selects cut-off fre-
quencies in the following order:
5080125 (Hz)
Only frequencies higher than those in the se-
lected range are output from the front or rear
speakers.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the volume level of
the FM tuner, which remains unchanged.
1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Press AUDIO to select SLA.
Press AUDIO until SLA appears in the display.
3
Rotate ROTARY ENCODER to adjust the
source volume.
Rotate ROTARY ENCODER increases or de-
creases the source volume.
SLA :+4 SLA :4 is displayed as the source
volume is increased or decreased.
Notes
! The MW/LW tuner volume level can also be
adjusted with source level adjustments.
! The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
42
En
Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (ASL)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1
Press AUDIO to select ASL.
Press AUDIO until ASL appears in the display.
2
Press ROTARY ENCODER to turn ASL
on.
ASL : MID appears in the display.
# To turn ASL off, press ROTARY ENCODER.
3
Rotate ROTARY ENCODER to select the
desired ASL level.
Rotate ROTARY ENCODER selects ASL level
in the following order:
LOW (low)MID-L (mid-low)MID (mid)
MID-H (mid-high)HIGH (high)