Scanning Cds And Tracks; Pausing Cd Playback; Selecting Discs From The Disc Title List - Pioneer DEH-P77MP Manual De Instrucciones

Multi-CD Player
Note
If you turn random play on during DSC and then
return to the playback display, D-RDM appears in
the display.

Scanning CDs and tracks

While you are using DSC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using MCD, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
3 Press ROTARY ENCODER to turn scan
play on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
SCAN :ON (on)SCAN :OFF (off)
! SCAN :ON  The first 10 seconds of each
track of the current disc (or the first track of
each disc) is played.
! SCAN :OFF  The track (or disc) will con-
tinue to play.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Notes
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during DSC and then
return to the playback display, D-SCAN ap-
pears in the display.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2 Press ROTARY ENCODER to turn pause
on or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
PAUSE :ON (on)PAUSE :OFF (off)
! PAUSE :ON  Play of the current track
pauses.
! PAUSE :OFF  Play will resume at the same
point that you turned pause on.
Selecting discs from the
disc title list
Disc title list lets you see the list of disc titles
and select one of them to playback.
1 Press FUNCTION to select TITLE LIST.
Press FUNCTION until TITLE LIST appears in
the display.
2 Rotate ROTARY ENCODER to scroll
through the list of titles that have been en-
tered.
# If no title has been entered for a disc, title is
not displayed.
3 Press ROTARY ENCODER to play your
favorite CD title.
That selection will begin to play.
Section
08
31
En