Recommended Spare Parts; Troubleshooting; Manufacturer Service Centre - Nilfisk cfm 125 Manual De Instrucciones

125/BDC1216/BDC1324/CV324/135/E-VAC1000

Recommended spare parts

The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations.
List of recommended spare parts (fig. 18)
Pos.
Filter "M" 125/BDC1216/CV324/E-VAC1000
A
B
C
D
E
F
G Bag (3 pcs) 125/BDC1216/CV324/E-VAC1000

Troubleshooting

Problem
The vacuum cleaner does not start
The vacuum cleaner revolutions
increase
Dust leaks from the vacuum cleaner
Noisy suction motor
Electrostatic current on the vacuum
cleaner
GB

Manufacturer Service Centre

Please consult the appendix.
09/2014
Description
Filter "M" BDC1324/135
Filter ring
Filter ring gasket
Filter clamp
Single phase motor 800W 50Hz
Single phase motor 800W 60Hz
Absolute filter "H"
Lack of power supply
Clogged primary filter
Clogged vacuum hose
The filter is torn
Inadequate filter
Worn or broken carbon brushes
Non existent or inefficient grounding
Dimension
Ø 460
Ø 460
Ø 460
Ø 460
Ø 460
Ø 410
Cause
Check for power at the socket
Check the condition of the socket and the
cable
Ask for assistance to be performed by a
qualified manufacturer's technician
Shake the filter. Replace it if necessary
Check the vacuum hose and clean it
Replace it with another of identical type
Replace it with another of suitable type and
check
Remove and replace the motor carbon
brushes
Check all grounding, particularly the union
to the inlet; moreover, the hose must be
strictly antistatic
-10-
Code
Z8 17767
Z8 17787
Z8 15003
Z8 17026
Z8 18079
4089100281
40000928
Z8 17455
147 0745 010
Remedy