Resetting The Microprocessor; Demo Mode; About This Manual - Pioneer MVH-P8300BT Manual Del Usuario

Section
02 Before you start
http://www.pioneerelectronics.ca
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owner's manuals, order product
catalogues, research new products, and
much more.

Resetting the microprocessor

The microprocessor must be reset in the fol-
lowing situations:
! Before using this unit for the first time after
installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
RESET button
1 Remove the front panel.
2 Press RESET with a pen tip or other
pointed instrument.

Demo mode

Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
The demo automatically starts when the igni-
tion switch is set to ACC or ON while the unit
is turned off. Turning off the unit does not can-
cel demo mode. To cancel the demo mode, op-
erate the function in the initial setting menu.
8
En
Operating the demo while the ignition switch
is set to ACC may drain battery power.
Refer to Demonstration (demo display set-
ting) on page 35.

About this manual

This manual describes operations of both
MVH-P8300BT and MVH-P7300. Only MVH-
P8300BT features Bluetooth functions, so the
explanations for those functions do not apply
to MVH-P7300.
In the following instructions, USB memories,
USB portable audio players, and SD memory
cards are collectively referred to as "external
storage devices (USB, SD)". If only USB mem-
ories and USB portable audio players are indi-
cated, they are collectively referred to as "USB
storage devices".
In this manual, iPod and iPhone will be re-
ferred to as "iPod".