Xm Tuner; Basic Operations; Storing And Recalling Stations; Selecting An Xm Channel Directly - Pioneer MVH-P8300BT Manual Del Usuario

Available accessories
Display (display setting)
You can switch to the desired text information.
1 Press M.C. to display the setting mode.
2 Press M.C. to select the desired setting.

XM tuner

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold sepa-
rately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.

Basic operations

Category
Text
Text
Text
XM1
3 3 3
1 Indicator display area
Refer to Indicator list on page 50.
2 Text information area
! Channel name
! Artist name
! Song title
! Band/Preset number/Frequency indica-
tor
3 Source image display
1 1 1
16:54
A-EQ
1 112
P.CH CH
2 2 2
Selecting a channel (step by step)
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease the channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel from a channel category on the next page.)
Switching the display off
1 Press and hold
.

Storing and recalling stations

Operations are basically the same as those of
the tuner. (Refer to Storing and recalling sta-
tions for each band on page 15.)
However, the band selection method is differ-
ent from that of the tuner.
Selecting a band
1 Push M.C. down.
Band can be selected from XM1, XM2 or XM3.

Selecting an XM channel directly

This function is available only for MVH-P8300BT.
When using the remote control, you can select
the channel directly by entering the desired
channel number.
1 Press DIRECT.
The channel number input display appears.
2 Press 0 to 9 to enter the desired channel number.
! You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The channel of the entered number is selected.
! After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.

Function settings

1 Press M.C. to display the function
menu.
Section
05
43
En