Tabla de contenido
Publicidad
SDS MAX
Chuck
Depth
Control Rod
Spare
Carbon
Brushes
Auxiliary
Handle
Grease
Tube
Auxiliary Handle
Operate the power tool only with the
CAUTION
auxiliary handle installed.
• The auxiliary handle can be rotated to any position for a
secure, low-fatigue posture.
• Rotate the auxiliary handle grip (A) counterclockwise to
loosen the mount (B) and swing the auxiliary handle to
the desired position.
• Then, retighten the auxiliary handle grip by turning
clockwise.
• Make sure the mount band is positioned in the proper
section of the housing.
Depth Control Rod
• Loosen the butterfly nut (C) and insert the rod (D) into
the mounting hole on the side of the handle.
• Adjust the position of the rod according to the depth of
the hole and tighten the butterfly nut.
6
ENGLISH
Function
Oil
Selector
deposit cap
Speed
Adjustment Knob
Mounting and Adjustments
Parts
Vibration
Absorber
Trigger
Switch
Power Cable
Protection
LED Power
Indicator
Power
Cord
B
A
Anti-skid
handle
Maintenance
Indicator
D
C
Publicidad
Tabla de contenido
