Ducane Affinity 3100 Guia Del Propietario página 30

Asador de gas natural
Ocultar thumbs Ver también para Affinity 3100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

aNNUal maiNtENaNcE
rEPlaciNG thE maiN bUrNErS
1)
Your Ducane
®
gas barbecue must be "OFF" and cool.
2)
Turn "OFF" gas at source.
3)
Remove the cooking grate and the heat distribution plates, exposing the burner
tubes.
4)
Remove front panel knobs, bezels and igniter Module for electronic ignition for the
burners.
5)
Then remove the front panel.
See: inspection of the Spider/insect Screens for removal of the burner tube.
To reassemble, reverse steps 3 through 5 above.
m caUtioN: the burner openings (1) must be positioned
properly over the valve orifices (2). check proper assembly
before fastening manifold/front panel in place.
m WarNiNG: after reinstalling the gas lines, they should be
leak checked with a soap and water solution before using
the barbecue.
1
2
battEry rEPlacEmENt oF bUrNEr iGNitEr
Unscrew the push button igniter and remove the old battery and replace with a new one.
Requires 1 "AA" alkaline battery. The shrink wrap must be removed from the battery
before installation.
30
www.ducane.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Affinity 410027010332

Tabla de contenido