Removing Belt - Panasonic MC-V9644 Instrucciones De Operación

Agitator Support
Support de l'agitateur
Soportes del agitador

Removing Belt

Tab
Languette
Pestaña
Base
- 38 -
➢ ➢ Disconnect cleaner from electrical
outlet.
➢ ➢ Frequently check and remove hair,
string and lint build-up in the POWER
NOZZLE brush and brush support
areas.
➢ ➢ If build-up becomes excessive,
disconnect POWER NOZZLE from
wand and follow the steps below.
➢ ➢ Remove light cover and light bulb
as shown under "REPLACING
HEADLIGHT BULB".
➢ ➢ Unscrew the two (2) POWER
NOZZLE cover screws .
➢ ➢ Turn POWER NOZZLE over.
➢ ➢ To remove cover, insert screwdriver
at cover tabs on both sides and
twist to release tabs.
➢ ➢ Turn POWER NOZZLE right side up.
➢ ➢ Press handle release pedal and
lower the swivel.
➢ ➢ Tilt cover forward from back until
front snaps free.
➢ ➢ Carefully insert and twist
screwdriver at each brush support
to free brush from base.
➢ ➢ Remove worn belt.
➢ ➢ See AGITATOR ASSEMBLY for picture
of complete brush assembly.