Tabla de contenido
Publicidad
Croma E 100 VarioJet
04332XX0
Croma C 100 3-Jet
04334XX0
Croma E 75 3-Jet
04336XX0
2
WATERSENSE® is a registered mark of the
U.S. Environmental Protection Agency
English
Technical Information
Max. flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Important
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to com-
A112.18.1-2005
plete the installation.
CSA B125.1-2005
•
The use of enhanced water efficient
shower heads (restricting water flow
below 2.5 gpm @ 80 psi) may result
in unexpected temperature changes
that might startle – or could even burn
– the bather if the water supply pres-
sure changes. Water supply pressure
changes can occur due to things like
toilet flushing and washing machine
or dishwasher operation.
•
Install only with a compensating valve rated
for this shower head's flow rate.
•
After installation, test the effect of adding this
shower head to your plumbing system. While
running your shower, activate each water-de-
manding appliance in the home (toilet, dish-
washer, clothes washer, etc.) and see if the use
A112.18.1-2005
of those appliances causes the temperature of
CSA B125.1-2005
the shower water to change suddenly.
•
Confirm that the water coming from the shower
head does not exceed 120° F. If the tempera-
ture of the water changes suddenly or exceeds
120°F, contact Hansgrohe at 800 334 0455
before using the showerhead.
•
Keep this booklet and the receipt (or other
proof of date and place of purchase) for this
product in a safe place. The receipt is required
should it be necessary to request warranty
parts.
A112.18.1-2005
CSA B125.1-2005
2.0 GPM
Publicidad
Tabla de contenido
