26
Operating instructions
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1.
Touch
2.
Immediately touch the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
vate, touch a heat setting
Power management
The power management divides the power
between two cooking zones in a pair (see the
illustration). The power function increases
the power to the maximum level for one
cooking zone in the pair. Automatically de-
creases the power in the second cooking
zone to a lower level. The display for the re-
duced zone change between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
-
.
comes on in the dis-
,
comes on. To deacti-