Using An Ac Power Adapter (Not Included) - Microlife Deluxe BP3GX1-5N Rexnord

4.3. Using the AC power adapter (not included)
You may also operate this monitor using an
AC adapter. To purchase an AC adapter for
this unit, call 1-800-568-4147.
a) Ensure that the AC adapter and cable are
not damaged.
b) Plug the adapter cable into the AC
adapter port on the right side of monitor.
c) Plug the AC adapter into a 110 V power
socket (U.S. or Canada).
d) Test that power is available by pressing
the POWER button.
Note:
• No power is taken from the batteries
while the AC adapter is connected to the
instrument.
• If the power is interrupted during a
measurement (e.g., by removal of the
adapter from the wall socket), the instru-
ment must be reset by removing the plug
from the instrument.
If you have any questions regarding an AC
adapter, call us at 1-800-568-4147.
4.4. Connecting the cuff and monitor
Insert the yellow cuff tube connector into the
yellow socket on the left side of the instrument.
If your cuff connector is another color, please
contact customer service as additional steps
are needed to obtain an accurate reading.
14