Using An A/C Power Adapter; Tube Connection - Microlife CVS/pharmacy BP3AC1-1PC Instrucciones De Uso

4.2. Using an AC power adapter (special accessory)
It is possible to operate this blood pressure instrument with an AC adapter. (output 6 V DC
/ 600 mA with DIN plug). Make certain that you use an adapter which fulfills the legal
requirements and electronic requirements in the U.S. (UL standard). Use of an AC adapter
other than a Microlife or CVS adapter may invalidate your warranty.
a) Push the plug into the socket on the back of
the monitor.
b) Plug the AC adapter into a 110 V
power socket (U.S. or Canada).
c) Test that power is available by
pressing the On/Off button.
Note:
• No power is taken from the batteries while the AC adapter is connected to the instru-
ment.
• If the power is interrupted during a measurement (e.g. by removal of the adapter from
the wall socket), the instrument must be reset by removing the plug from the instru-
ment.
• Please call 1-866-464-6184 if you have questions
relating to the AC adapter.

4.3. Tube connection

Insert the cuff tube into the opening
on the side of the monitor,
as shown in the diagram.
7