Husqvarna K970 III Chain Manual De Instrucciones página 8

Ocultar thumbs Ver también para K970 III Chain:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Check that the hand guard is not damaged. Replace
the guard if damaged.
Clutch cover, spray guard and rear right
hand guard
Clutch cover and spray guard provides protection against
contact with moving parts, ejected debris, thrown water
and concrete slurry. The spray guard and rear right hand
guard are also design to catch the diamond chain if it
snaps or jump of.
Checking the clutch cover and spray guard
Ensure there are no cracks or holes from slurry
blasting in the clutch cover and spray guard. Replace
cover or guard if damaged.
Vibration damping system
WARNING! Overexposure to vibration
!
can lead to circulatory damage or nerve
damage in people who have impaired
circulation. Contact your doctor if you
experience symptoms of overexposure
to vibration. Such symptoms include
numbness, loss of feeling, tingling,
pricking, pain, loss of strength, changes
in skin colour or condition. These
symptoms normally appear in the
fingers, hands or wrists. These
symptoms may be increased in cold
temperatures.
Your machine is equipped with a vibration damping
system that is designed to reduce vibration and make
operation easier.
The machine's vibration damping system reduces the
transfer of vibration between the engine unit/cutting
equipment and the machine's handle unit. The engine
body, including the cutting equipment, is insulated
from the handles by vibration damping units.
8 – English
MACHINE´S SAFETY EQUIPMENT
Checking the vibration damping system
WARNING! The engine should be
!
switched off, and the stop switch in
STOP position.
Check the vibration damping units regularly for cracks
or deformation. Replace them if damaged.
Check that the vibration damping element is securely
attached between the engine unit and handle unit.
Muffler
WARNING! Never use a machine without
!
a muffler, or with a faulty muffler. A
damaged muffler may substantially
increase the noise level and the fire
hazard. Keep fire fighting equipment
handy.
The muffler gets very hot during and
after use as well as when idling. Be
aware of the fire hazard, especially when
working near flammable substances and/
or vapors.
Keep fire fighting equipment handy.
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Inspecting the muffler
Check regularly that the muffler is complete and
secured correctly.

Publicidad

Tabla de contenido
loading

Tabla de contenido