1. Inserting a SIM card
• Turn off the phone and remove the back cover and battery.
• Insert the SIM card correctly into the SIM card slot (see diagram
opposite). You have 2 SIM card ports (SIM1 and SIM2). Make sure to
observe the direction in which the cards are inserted.
• Then replace the battery and the rear cover.
CAUTION: Data can only be used on one SIM card.
2. Inserting a MicroSD card
It is possible to increase the internal memory of the SENIOR C device with
a MicroSD card (MicroSD card up to 32GB).
• Switch off the phone and remove the back cover and the battery.
• Insert the memory card into the slot provided.
• Then replace the battery and the rear cover.
CAUTION : Inserting or removing a SIM card and MicroSD card requires
the phone to be switched off completely.
3. Charging the battery
Charging the battery :
• To charge the battery you have 2 options:
- Plug the USB cable (supplied) into the USB port of your
mobile phone and plug the AC adapter into a power outlet.
or alternatively,
- Connect the USB cable from your mobile phone to the
charging station and plug the AC adapter into a power outlet.
• The battery charge icon lights up during charging and
indicates the charging status.
• When the battery is fully charged, you can unplug the
device from the power outlet.
IMPORTANT :
• The mobile phone can only be charged via its USB port
and/or the charging station.
• Be sure to fully discharge your mobile phone before
charging it for the first time.
• The battery should be charged for at least 5 to 8 hours
English
Micro
SD
13