Ld Speaker Preset Library; Creating And Administering Custom Speaker Presets - LD Systems LDDSP44K Manual De Usuario

8. LD SPEAKER PRESET LIBRARY

Download the desired LD Systems speaker library from the product page (LDDSP44K / LDDSP45K) at WWW.LD-SYSTEMS.COM, save it
to your PC in a folder of your choice, and unzip it as needed. Start the OCS software and establish a connection with the power amp (USB
/ Ethernet). Now click on LIBRARY in the overview window, then on LD Speaker Preset and open the previously downloaded LD Systems
speaker library by clicking on "Open LD Speaker Library from disk", select the file on your PC, and click Open. The speaker presets will now
be displayed with names in the list of speaker presets. Now send the LD speaker library to the power amp by clicking on "Send LD Speaker
Library to Amplifier". The presets are now available for use and can be loaded via the selection window for channels CH A to CH D (see
6.28). Click with the right mouse button on the desired preset to individually save the preset as a file on your PC (Save to disk).

9. CREATING AND ADMINISTERING CUSTOM SPEAKER PRESETS

With the OCS software, you have the option to create and manage individual speaker presets (custom speaker presets) for the LD Systems
DSP power amps DSP44K and DSP45K. Sign into the OCS software as administrator by clicking on the Mode button in the menu bar, enter
the password "admin", and confirm with OK. If a custom speaker library was saved with a personal password, this password must be
entered into the corresponding field when signing in. To create new custom speaker presets, click on New Library and the password will
reset to "admin".
The editing field SPEAKER PRESET (6.28) will display the EDIT button after signing in. Click on EDIT to open the editing field for custom speaker
presets and display the editing options. Configure the OUTPUT ROUTING (single, 2-way, bridge) first when creating a speaker preset.
To protect the custom speaker library with a unique password, click on LIBRARY in the overview window then, under Custom Speaker
Preset, click on Change Library Password, enter a custom password, and confirm it in the subsequent window.
Custom libraries that are then to be saved to the computer can only be edited using this personal password
because the password is saved with the library. When creating a new library (New Library), the password for it will be reset to the standard
password "admin".
Single - Each channel can be configured individually via CHANNEL EDIT and SPEAKER PRESET EDIT and can be managed from a signal
source of your choice (SOURCE).
10