Frequency Response - LD Systems LDDSP44K Manual De Usuario

FREQUENCY RESPONSE (SIGNED IN AS ADMINISTRATOR)
9.91
9.88
9.89
9.90
9.82 Frequency Response - Graphic depiction of the frequency response. (Zooming in horizontally: Mark the desired area by
dragging the mouse cursor to the right. Zooming out horizontally: Mark the area by dragging the mouse cursor to the left.
Push vertically with Ctrl and left mouse button)
9.83 GAIN and FREQUENCY grip point - Click and hold this grip point to change the frequency and gain of the chosen
frequency band by moving it horizontally and vertically.
9.84 Grip point FILTER QUALITY Q - Click and hold a grip point to change the filter quality of the
chosen frequency band by dragging horizontally as desired.
9.85 Max. / Min. - Zoom in vertically using the arrow icons.
Disable GAIN - Click on this button to suspend editing of the gain on the graphical window (red button)
9.86
or to again allow editing (gray button).
Disable FREQ - Click on this button to suspend editing of the frequency on the graphical window (red button) or to again allow
9.87
editing (gray button).
Cursor - Select which channel the cursor will follow on the graphical window (frequency and gain displays).
9.88
Show Name - Select which channel will be shown on the graphical window. Click the color buttons to set the line color individually.
9.89
9.90 Show Phase - Check the box to display the phase response on the graphical window.
Influence - Check a box in the input field of processing options to be shown in the frequency curve.
9.91
9.86 9.87
9.85
9.85
9.84 9.83 9.84
9.82
17