Creating And Administering Amp Presets; Input Gain - LD Systems LDDSP44K Manual De Usuario

9.95 List of custom speaker presets (1 - 80).
Reset Preset - Removes a preset from the list. Click on the desired preset with the right mouse button, then click on
9.96
Reset Preset and confirm with Yes.
Open from Disk - Loads a preset from the PC to the list. Click on a free preset (empty) with the right mouse button, then click on
9.97
Open from disk, and select the desired preset from your PC's hard drive and click on Open.
Save to disk - Save the preset to your PC. Click on the desired preset with the right mouse button, then click on
9.98
Save to disk, and select a location to save it, name the preset as desired, then click on Save.
Save Custom Speaker Library to Disk - Saves all presets in the list to a file on your PC. Click on Save
9.99
Custom Speaker Library to Disk, and select a location to save it, name the library as desired, then click on Save.
Open Custom Speaker Library from Disk - Import a custom speaker preset library from the PC into the preset list.
9.100
Click on Open Custom Speaker Library from Disk, and select the desired file from your PC hard drive and click on
Open.
Send Custom Speaker Library to Amplifier - Sends and saves the currently loaded custom speaker preset library to the power
9.101
amplifier. Click on Send Custom Speaker Library to Amplifier. The process will take several seconds.
Send Selected Custom Spk. Preset to Amp - Sends a preset from the list to the preset library of the power amp. Click
9.102
to select the desired preset and then click on Send Selected Custom Spk. Preset to Amp.
Change Library Password - To protect the custom speaker library with a unique password, click on
9.103
LIBRARY in the overview window then, under Custom Speaker Preset click on Change Library Password, enter a custom
password, and confirm it in the subsequent window. Custom libraries that are then to be saved to the computer
can only be edited using this personal password because the password is saved with the library.
When creating a new library (New Library), the password for it will be reset to the standard password
"admin".

10. CREATING AND ADMINISTERING AMP PRESETS

An amp preset consists of the choice of speaker presets from the custom speaker preset and LD speaker preset libraries (Library) and the
settings options in the CHANNEL EDIT area (6.26). Select the desired speaker presets for channels CH A to CH D (6.28) and adjust the gain,
polarity, muting, delay, and equalizer depending on the intended purpose and in real time when needed. An amp preset created in this way
can be both loaded directly to the power amp (see 6.23 AMP PRESET - SEND) as well as saved as a file to your PC. In both cases, select
an empty preset on the AMP PRESET control panel (6.23) using the arrow icons and enter a name for the preset into the display or input
window. To load the amp preset to the power amp, now click on SEND (Send Amp Preset to Amplifier Library) to save it as a file to your PC,
click on the diskette symbol (Save an Amp Preset File to disk), select a storage location on your PC, and save it.

INPUT GAIN

10.1
10.12
10.4
10.2
10.5
10.6
10.3
10.7
10.2
10.8
INPUT DELAY
10.1
10.13
10.9
10.10
10.11
10.9
10.8
19