How To Install Your Remote Control; Maintenance; How To Clean Your Ceiling Fan Blades - Fanimation ZONIX MA4660 Serie Manual De Instrucciones

How to Operate Your Ceiling Fan (Continued)
6. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch on top of motor
assembly to the opposite position and turn fan on
again. (Figure 6)
Reverse Switch Information
Season Rotation Direction
Summer Counterclockwise
Winter Clockwise
1. Installing Wall Holder: (Figure 1)
Attach wall holder using the two provided screws.
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.

How to Clean Your Ceiling Fan Blades

Periodic light dusting of the blades is recommended.
A feather duster will work best.
Switch Position
Left
Right

How to Install Your Remote Control

Maintenance

Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the blades.
17
Figure 6
Screws (2)
Wall Holder
Figure 1
CAUTION
Reverse
Switch