How To Mounting Your Switch Cup Cover Assembly (For Ma4660) - Fanimation ZONIX MA4660 Serie Manual De Instrucciones

How to Mounting Your Switch Cup Cover Assembly
(for MA4660)
1. Remove the switch cover from the switch cup cover
assembly by twisting in a counterclockwise direction.
Retain the switch cover for Step 6. (Figure 1)
2. Remove one of the three screws in the
support-cover switch cup and retain the screw for
Step 5. Slightly loosen the remaining two screws and
remove the inner-switch cup. Retain the inner-switch
cup for reassembly in Step 5. (Figure 2)
3. Remove the three screws in the support bracket at
the bottom of motor assembly and retain the screws
for later. (Figure 3)
4. Attach the support-cover switch cup to the support
flange using the previously removed three screws and
fully tighten. (Figure 4)
Switch Cup Cover
Assembly
Inner-Switch Cup
Motor Assembly
Motor Assembly
Support-Cover
Switch Cup
13
Switch Cover
Figure 1
Support-Cover
Switch Cup
Figure 2
Figure 3
Figure 4