Publicidad
Step 14
Insert a SLIDE CAM (HH) into each DRAWER SIDE (D83 and D84).
å
Fasten the DRAWER RIGHT (35GC) and DRAWER LEFT (35GD) to
å
the DRAWER SIDES (D83 and D84). Use four GOLD 5/16" FLAT
HEAD SCREWS (PP) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Fasten two KNOBS (EE) to the DRAWER FRONT (K). Use two
å
BLACK 7/8" MACHINE SCREWS (MM).
2
3
EE
BLACK 7/8" MACHINE SCREW
(2 used for the KNOBS)
Page 18
Roller end
1
D84
K
MM
GOLD 5/16" FLAT HEAD SCREW
HH
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D83
PP
(4 used in this step)
408696
HH
Roller end
1
2
3
www.sauder.com/services
Publicidad
