Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 315 Especificaciones Del Producto

Product Safety Information

Intended Use:
This Sander is designed for smoothing down body filler or shaping and leveling large flat
surfaces.
For additional information refer to Safety Information Manual Form 04584967.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Strokes Per
Minute
Model
spm
315 and 315-EU 3000
Tool
Weight
Model
lbs
315 and 315-EU 6.1
† K = 3dB measurement uncertanity
pA
‡ K = 3dB measurement uncertanity
wA
*K = measurement uncertanity (Vibration)

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16575706 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80156177_ed2
Stroke
Pad Size
Length
Inch mm inch
1 25.4 2.75 x 17.5 70 x 445
Overall Length
kg inch mm
2.77 15.8 401
Average Air
Consumption
mm cfm l/min
8
Sound Level dB (A)
(ISO15744)
† Pressure (L ) ‡ Power (L
P
93.3 106.3
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
EN
Air Consumption
@ Load
cfm l/min
226 9 255
Vibration
( ISO28927)
m/s
2
) Level *K
W
20.5 1.6
EN-1