Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 4151 Serie Manual Del Usuario

Product Safety Information

Intended Use:
These Air Orbital Sanders are designed for smoothing and sanding paint, fiberglass, wood
and body filler.
For additional information refer to Safety Information Manual Form 04580387.
Manuals can be downloaded from www.ingersollrandproducts.com.

Product Specifications

Free
Speed
Model(s)
rpm
4151 12000
4151-2 12000
4151-5 12000
4152 12000
† K = 3dB measurement uncertanity
pA
‡ K = 3dB measurement uncertanity
wA
* K = Vibration measurement uncertainty

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16577215 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Regulator
2. Emergency shut-off valve
3. Hose diameter
4. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
04576005_ed14
Pad Diameter
inch mm † Pressure (L
6 152
6 152
5 127
6 152
5. Coupling
6. Safety Air Fuse
7. Grease - Remove sanding pad and inject
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
81.6 92.6
81.6 92.6
81.6 92.6
81.6 92.6
EN
Vibration (ISO28927)
m/s²
) Level *K
w
7.5 1.6
6.2 1.0
6.2 1.0
8.2 1.7
EN-1