Product Safety Information; Product Specifications; Installation And Lubrication; Parts And Maintenance - Ingersoll Rand CA Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Belt Sanders are designed for light sanding such as smoothing edges and welds.
For additional information refer to Product Safety Information Manual Form 04584942.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Model(s)
CA120RS812ML-EU 12 x 1/2 (305 x 13)
CA120RS418ML-EU
CA120RS818ML-EU 18 x 1/2 (457 x 13)
CA200RS812ML-EU 12 x 1/2 (305 x 13)
CA200RS418ML-EU
CA200RS818ML-EU 18 x 1/2 (457 x 13)
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16577249 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
80154727_ed1
Arbor
Belt Size
Speed
inch (mm) rpm
12,000
18 x 1/4 (457 x 6) 12,000
12,000
20,000
18 x 1/4 (457 x 6) 20,000
20,000
6.
7.
8.
9
10. Grease
Belt Sound Level dB (A)
Speed (ISO 15744)
† Pressure (L
sfpm
2,700 79.1
2,700 79.3
2,700 79.3
4,500 81.4
4,500 81.4
4,500 81.4
Thread size
Coupling
Safety Air Fuse
Oil
EN
Vibration
Level
(ISO 8662)
) ‡ Power (L )
m/s²
p w
--- 0.5
--- 0.8
--- 1.2
--- 0.6
--- 1.0
--- 1.8
EN-1