Descargar Imprimir esta página

Health O Meter PRO PLUS 1100KL Manual Del Usuario página 9

Balanzas electrónicas
Ocultar thumbs Ver también para PRO PLUS 1100KL:

Publicidad

Idiomas disponibles

Idiomas disponibles

This scale is shipped with the Menu Lock function enabled. The Menu Lock function disables
certain buttons on the scale's keypad, thus preventing unauthorized users from making
changes to your scale settings This Lock can be bypassed temporarily to allow you to
customize your scale's functionality. Please refer to page 6 for instructions on how to bypass
the Menu Lock.
1.
Remove protective plastic film from keypad and display.
2.
Place batteries in the battery holder (see "Replacing Batteries").
3.
Plug the scale's AC adapter into the power source.
4.
Make sure there is no object on the weighing platform
5.
Press the ON/OFF button to turn the scale on. The display will show "Health o Meter
Pro Plus" and then "000
6.
Place a weight [not to exceed the capacity] on the scale. The display should read
"WEIGHING" until the weight calculation is complete and the weight is displayed.
7.
Press the KG/LB button to select the weight mode (Lb/Kg).
8.
Press the REWEIGH button; the scale should perform the weighing process again.
9.
Remove the weight from the scale, the scale will return to zero and the display will read
"ZERO" on the left upper side of the screen along with
If the set up procedure failed, refer to the troubleshooting instructions. If the problem
is not corrected, refer to qualified service personnel.
(a)
To adjust the display backlight and/or contrast, please refer to page 12.
(b)
To change the display mode in pounds to fractions or decimals, please refer to page 6.
1.
Unplug the scale.
2.
Remove the battery cover from the display assembly.
3.
Disconnect battery holder cable connector from the scale-battery connector.
4.
Carefully remove the battery holder by sliding it out the display assembly.
5.
Replace the batteries with new ones.**
6.
Carefully position the battery holder into the display assembly.
7.
Connect the battery holder cable connector to the scale-battery connector.
8.
Attach the battery cover to the display assembly and install the screw.
** We recommend the use of EVEREADY Energizer
(a)
00
".
Lb
oz
(b)
*
"000
00
".
Lb
oz
®
e2
batteries
TM

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

Pro plus 2650klPro plus 2700kl