Health O Meter PRO PLUS 1100KL Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
Figure 2
Refer to the Parts List on page 22 for details on parts
Insert the power cord into the retaining slot. Align the rear cover tabs with the
slots on the rear of the display assembly. Secure with 4 screws.
5.Gently tip the scale. Screw in 4 plastic feet. Do not tighten.
6.Gently return the scale to the upright position.
WARNING : Do not drop the scale on its feet. This could result in load cell damage.
. Screw/unscrew the plastic feet to level the scale.