Health O Meter PRO PLUS 1100KL Manual Del Usuario página 13

02 Tare Weight
Before making changes to this scale setting, please refer to page 6 "Menu" to temporarily
activate the Menu key.
NOTE: Due to the scale's sensitivity, we recommend using the REWEIGH function prior to
setting the TARE weight, in order to eliminate any operator interference with the item
to be tared out.
There are two ways to manually enter a tare weight (such as the weight of a wheelchair,
shoes, etc): press MENU (1),
TARE (9). If there is no weight on the scale platform (value displayed is zero and there is no
tare) and the user presses the TARE button (9), the Tare Weight window appears and
prompts the user to enter the TARE value and to press ENTER. NOTE: The tare weight must
be entered using the following increments: 4oz, 0.2lb, ¼ lb. The value entered will display in
minus (-). After the TARE has been entered, the scale goes back to normal operation. This
TARE value is stored in memory until changed or cleared. If the tare weight is not entered in
30 seconds the scale will revert back to normal operation, and the Menu Lock will be
activated.
Important: The TARE weight cannot exceed 250lb(2650KL & 2700KL)
The TARE weight cannot exceed 150lb(1100KL)
TARE display
indicates the weight
that has been tared
out (Figure 5 shows the
display after removal of
the tared weight from
the scale's platform)
Automatic Tare
The user can set a tare weight by pressing the TARE button (9) while there is a
weight on the scale platform. The display will come to zero and the word "TARE" will
be displayed to indicate there is a tare value in the memory (as displayed in Figure 5
above).
Removing the Tare
Additional pressing of the TARE button will delete the tare value from memory, TARE will
disappear from the display and the scale will resume normal operation.
03 DATA MANAGEMENT
hold for 5 seconds
and select option 02-Tare Weight or press
Figure 9. Tare Weight
11
The number that is to be changed will
flash and will move from the left to the
right after the appropriate number was
entered or by using the c key (left)
and the d key (right).