Care And Cleaning - BLACK&DECKER FP1600B Manual De Instrucciones

Ocultar thumbs Ver también para FP1600B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified
service personnel.
Note: do not attempt to sharpen the cutting edges of the chopping blade or
slicing and shredding disk. They are permanently sharpened at the factory
and will be ruined if sharpened.
CLeaNING
Note: Before cleaning, be sure unit is turned off and cord is unplugged.
• Completely disassemble processor parts before washing.
• Rinse parts immediately after processing for easy cleanup.
Caution: the slicing and shredding disk is very sharp. use caution when
handling and storing.
• Wipe base and feet with a damp cloth and dry thoroughly. Stubborn spots
can be removed by rubbing with a damp cloth and a mild, nonabrasive
cleaner. do not immerse base in liquid.
• All removable parts can be washed by hand or in a dishwasher. Hand
washing of plastic parts will help to maintain the food processor's
appearance.
• If washing by hand, fill workbowl with hot, soapy water and rapidly raise
and lower the chopping blade or slicing and shredding disk up and down on
the center shaft.
Caution: the slicing and shredding disk is very sharp. use caution when
handling and storing.
• If washing in a dishwasher, place removable parts on top rack only—not in
or near utensil basket.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons
of baking soda and 1 tablespoon of water. Apply to stains and let stand
overnight. Rinse and dry.
• do not use rough scouring pads or cleansers on any plastic or metal parts
to clean.
• do not allow chopping blade or slicing and shredding disk to soak in water
for long periods of time.
• Remember to clean the internal shaft of the chopping blade; use a baby
bottle brush to remove any clogged food particles.
• If you are having trouble closing the cover over the workbowl, apply a small
amount of vegetable oil to the rim of the cover and workbowl. This should
make the pieces work smoother when attaching the cover to the workbowl.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fp1700b

Tabla de contenido