16
fEAtURES
OvEN TEMPERATURE
AdjUSTMENT
You may find that your new oven cooks differently than
the one it replaced. Use your new oven for a few weeks
to become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too cold,
you can adjust the oven temperature yourself.
Adjusting the oven temperature
1. Press the SETTING button until "AdJU" appears in
the display.
2. Using the number buttons, enter the amount of
degrees that you wish to adjust the oven.
3. Press the SETTING button repeatedly to toggle
between plus (+) or minus (-) to adjust the
temperature either up or down.
4. Press the START button to accept the change.
NOtE
• This adjustment will not affect the broiling or Self
Clean temperatures. The adjustment will be
retained in memory after a power failure. The oven
temperature can be increased (+) or decreased (-) as
much as 35°F or 19°C.
• Once the temperature is increased or decreased,
the display will show the adjusted temperature
until it readjusts.
LANGUAGE
The default language of the display is English. It can be
changed to Spanish or French
1. Press the SETTING button until "Lng" appears in the
display.
Press the 1 button for English, 2 button for Spanish,
or the 3 button for French.
2. Press the START button to accept the change.
PREHEATING ALARM LIGHT
When the oven reaches its set-temperature, the preheat-
ing alarm light will flash until the oven door is opened.
You can activate or deactivate the preheating alarm
light.
1. Press the SETTING button until "PrE" appears in the
display.
2. Press the 1 button for ON or press the 2 button for
OFF.
3. Press the START button to accept the change.
BEEPER vOLUME
1. Press the SETTING button until "Beep" appears in
the display.
2. Press the 1 button for LOUD, 2 button for NORMAL,
3 button for LOW, and press the 4 button for MUTE.
3. Press the START button to accept the change.
NOtE
On models with only two volume settings:
Press the 1 button for NORMAL, or the 2 button for
MUTE.
Then press the START button to accept the change.
FAHRENHEIT OR CELSIUS
The oven temperature settings can either be set to
Fahrenheit or Celsius. The oven defaults to Fahrenheit
unless changed by the user.
1. Press the SETTING button until "UNIT" appears in
the display.
2. Press the 1 button for F (Fahrenheit) or the 2 button
for C (Celsius).
3. Press the START button to accept the change.
OvEN LIGHT
The interior oven light automatically turns ON when the
door is opened. The oven light may also be manually
turned ON or OFF by pressing the OVEN LIGHT button.
NOtE
The oven light cannot be turned on if the Self Clean
function is active.