Philips NORELCO S5660 Manual De Instrucciones página 32

ENGLISH
32
22_002_7353_1_DFU-Booklet_A6_v6.indd 32
C
5 Place a new shaving head in the holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
C
6 Hold the shaving head holder in your hand
and place the retaining ring on the shaving
1
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
2
Do not place the shaving head holder on a
surface, as damage may occur.
7 Repeat this process for the other two
cutters and combs.
C
NOTE: Each retaining ring has two recesses and
two projections that fit exactly in the projections
and recesses of the shaving head holder. Make sure
you hear a 'click' indicating the retaining ring is fixed
into place.
C
8 Reinsert the hinge of the shaving head
holder into the slot of the shaving unit.
Close the shaving head holder (click).
C
To reset the shaver, press and hold the On/
9
Off button for approximately 7 seconds.
7 sec.
06/06/17 16:14