Use; General - Agilent Technologies TwisTorr 304 FS AG Manual De Instrucciones

Use

General

Make all vacuum manifold and electrical connections and refer
to
TwisTorr 304 FS pump instruction manual before to operating
the
TwisTorr 304 FS AG Rack controller.
WARNING! To avoid injury to personnel and damage to the equipment, if the pump is laying
on a table make sure it is steady. Never operate the TwisTorr 304 FS pump if the
pump inlet is not connected to the system or blanked off.
The input signal P1 connector should be left in position including the shipping
NOTE
links if no external connections are made. The forepump and the TwisTorr 304 FS
pump can be switched on at the same time.
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01 (C)
Technical Information

Use

255/301
17