How To Wire Your Ceiling Fan - Fanimation AIREDROP LP8069 Serie Manual Del Usuario

NOTE: The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the combination
code in the remote and receiver.
NOTE: Factory setting is all up. Do not use this
position.
1. To set the code on receiver unit, slide dip switches
to the same positions as set on the remote. (Figure 1)
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring
(Figure 2).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION WILL
DAMAGE THIS RECEIVER.
2. Slide receiver unit into the Hanger Bracket.
(Figure 3)
Receiver Unit

How to Wire Your Ceiling Fan

WARNING
WIFI Antenna
Hanger Bracket
ANTENNA
(Leave connected
and do not cut)
Figure 3
12
Receiver Unit
ON DIP
1 2 3
Dip Switch
Figure 1
MAIN FUSE BOX
Figure 2
4 5