Sears Kenmore 795.7203 Manual De Uso página 16

REFRIGERATOR INSTALLATION
HOW TO REPLACE THE FREEZER DRAWER
With both hands, pull out the center bar until the rail
is fully extended.
Hook the door support into the rail tabs on both sides.
Lower the drawer into its final position and tighten the
screws .
3
3
Align the tabs on the covers with the assembly holes
on each rail and snap the rail covers in place to
secure.
NOTE: Make sure that the left and right rail covers are
1
With the drawer pulled out to full extension, insert the
2
WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to touch or go
near the freezer drawer.
WARNING: DO NOT step or sit down on freezer
drawer.
Assembly Hole
16
attached to the correct rails. See picture below.
Left Rail
Cover
lower basket in the rail assembly.
4
Right Rail
Cover
4