Automatic Icemaker - Sears Kenmore 795.7203 Manual De Uso

AUTOMATIC ICEMAKER

Ice is made in the automatic icemaker and sent to the
dispenser. The icemaker will produce 70~210 cubes in
a 24-hour period, depending on freezer compartment
temperature, room temperature, number of door
openings and other operating conditions.
•
It takes about 12 to 24 hours for a newly installed
refrigerator to begin making ice. Wait 72 hours
for full ice production to occur.
•
Ice making stops when the in-door ice bin is full. When
full, the in-door ice bin holds approximately 6 to 8 (12-
16 oz) glasses of ice.
•
To turn off the automatic icemaker, set the icemaker
switch to OFF (O). To turn on the automatic icemaker,
set the switch to ON (I)
•
The water pressure must be between 20 and 120 psi
(140 and 830 kPa)on models without a water filter and
between 40 and 120 psi (280 and 830kPa) on models
with a water filter to produce thenormal amount and size
of ice cubes.
•
Foreign substances or frost on the ice-detecting sensor
can interrupt ice production. Make sure the sensor area
is clean at all times for proper operation.
USING YOUR REFRIGERATOR
WARNING
Personal Injury Hazard
DO NOT place fingers or hands on the automatic ice
making mechanism while the refrigerator is plugged in.
Power
Switch
Ice-detecting
Sensor
21
Icemaker
2012.6.13 10:28:59 AM