Items Supplied; Technical Data; Preparations At The Workplace - Hilti NPU 100 IP-A22 Manual De Instrucciones Original

3.5

Items supplied

Hole punch, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com.
4

Technical data

Rated voltage
Weight
Max. punching capacity in 10 ga steel
Max. punching capacity in 10 ga stainless steel
4.1 Battery
Battery operating voltage
Ambient temperature
Storage temperature
5 Operation
5.1

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2 Inserting the battery
CAUTION
Risk of injury! A falling battery presents a risk of injury.
▶ Take care to ensure that the battery is inserted correctly.
1. Push the battery into the battery holder until it engages with an audible click.
2. Check that the battery is seated securely.
5.3 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out toward the rear.
5.4 Assemble Hilti retaining leash (optional)
ATTENTION
Damage to the tool and/or the retaining leash. Incorrect handling may lead to damage to the tool and/or
retaining leash.
▶ Do not use a metal chain as a retaining leash. Do not use retaining leashes longer than 6 ft (2 m).
2200480
*2200480*
Printed: 13.06.2018 | Doc-Nr: PUB / 5436086 / 000 / 00
2
3
4
NPU 100 IP-A22
21.6 V
3.02 kg
(6.66 lb)
4"
4"
21.6 V
−10 ℃ ... 60 ℃
(14 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
English 5