Instruction manual
rubber stop from the drainage hole at the bottom of the unit. The
water will then begin to drain. After this has stopped, you can
insert the drain stop.
Internal Tank Water Full Alarm Function
•
The inner water tank in the air-conditioner has one water level
safety switch that controls the water level. When the water level
reaches an anticipated height, the water full indicator lamp lights
up. Follow above steps to drain the water.
INSTALLATION
•
The air-conditioner should be installed on a flat and stable
surface. Do not block the air outlet and allow at least 30cm
around the unit.
•
Socket wiring should be in accordance with the local electric
safety requirements.
10
Exhaust Hose Installation
•
Twist both ends of the hot-air exhaust hose(9) into the hose
connector window end(8) and the hose connector air conditioner
end(10).
•
Insert the hose connector air conditioned end(10) into the
openings at the back of the air conditioner.
•
Fix the hose connector window end(8) to the nearest windowsill.