Commission Rate Programming - Sharp XE-A505 Manual De Instrucciones

To delete a PLU/UPC code, use the following sequence:
Function selection
*: Item:
A Commission group number
B PLU/sub-department selection
(For PLU code only)
When programming UPC codes, always enter 1 for B.
Key operation example
When you program all 7000 PLU/UPC codes, the programming sequence will be complete with a
press of the

Commission Rate Programming

3
Based on each clerk's sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, which is printed on clerk reports.
Commission rate
s 28
o
PLU/UPC code
Ä
Scan UPC code
o
PLU/UPC code
Ä
Scan UPC code
o
1
s A
10
s
key.
@
Commission
number (1 or 2)
v
To delete the following
PLU/UPC
To delete another PLU/UPC
To program "00"
*
AB
To program the following PLU/UPC
To program another PLU/UPC
Selection:
Sub-department
PLU*
@
Commission rate
A
s A
Entry:
0-2 (0: Non commission)(default:0)
0
1
Print
PLU/sub-dept. selection
Commission group
number
s A
(0.00 - 999.99)
39