Publicidad
Idiomas disponibles
Idiomas disponibles
– do not make any changes to the product
– do not wear it on open wounds
– do not use in case of intolerance of one of the materials used
– no re-use – this medical aid is intended for treating one patient
– whilst wearing the brace, please neither use any creams nor ointments in
the vicinity of the attached aid as they can destroy the material
Fitting instructions
Before putting on, bend the aluminium splint to the desired shape.
1
Open the wide sealing tape completely and leave the narrow sealing
tape closed.
2
Slip-on the wrist brace fully and close the wide sealing tape on the
velour using the micro Velcro. Ensure that the wrist brace interlocks
and fits the anatomy.
3
If needed, adjust the fastener in the thumb region.
Removal
To remove the brace please open the wide sealing tape. Grasp the splint
in the palm area and pull the brace off over the fingers. Close the Velcro
fasteners in order to avoid early wear to the Velcro surface.
Material composition
Polyamide (PA), polyurethane (PUR), cotton (CO), elastane (EL), polyester (PES)
The sewn in textile label provides the precise material composition.
EN
09
Publicidad
