Supply; Accessories And Spare Parts (Orders) - Metrix MX1 Manual De Instrucciones

4-4 Compliance with international standards
Electrical safety (EN 61010-1 - 2001)
CEI 1010-1 EN61010 NF-C 42020 VDE 0411
Double insulation:
Pollution level: 2
Installation category: III according to CEI 664
Allocated voltage: 600V
4-5 Electromagnetic compatibility
Emission (EN 61326-A2 - 2001)
Immunity (EN 61326-A2 - 2001)
Maximum influence in the presence of conducted radio frequencies: 3 times
the accuracy class if the length of the measured circuit is > 3 m.
4-6 Mechanical protection
Watertightness (EN 60529/A1 - 2000)
Protection index: IP65
5-1 To order
Delivery:
1 MX1 multimeter
-
1 set of 2 leads with tips
-
- 4 fuses, 2 spares
1 fitted 1.5V battery
-
1 instructions leaflet
-
1 strap on the back of the casing
-
5-2 Spare parts and accessories
- 1 LR6 1.5V battery
- 1 HPC fuse 1.6A / 6.3X32 / 600V / 50kA
- 1 HPC fuse 10A / 6.3X32 / 600V / 50kA
Different measurement accessories widen the scope of application or provide the
altimeter with new functions.
Documentation on request.
Current clamp: ratio 1000/1 (MN08)
-
Carry case 240 x 230 x 70mm with strap P01 2980 33
-
Set of leads with tips
-
- Set of crocodile clamps
30kV high voltage probe , ratio 100/1
-
DC

5 - SUPPLY

MX1
P01 2960 33
AT 0071
AT 0070
P01 1204 01
P01 2950 84
P01 1018 48
HT 212
16