Section 7. Troubleshooting; Using The Cleaner Error Indicator - Polaris 8050 Sport El Manual Del Propietario

Section 7. Troubleshooting

7.1

Using the Cleaner Error Indicator

The Cleaner Error Indicator
cleaner malfunctions.
Information LED Flashing
LED flashes once with one second
interval.
LED flashes twice with one second
interval.
LED flashes three times with one
second interval.
on the control unit flashes in a specific sequence to indicate one of three possible
Unplug the floating cable from the control unit and reconnect.
If the problem is not resolved through troubleshooting, first contact your
local retailer to request a diagnostic review, or contact
Polaris Technical Support at (USA) 1-800-822-7933; 1-888-647-4004
(Canada).
Turn cleaner wheels to ensure they are not jammed.
Check brushes for debris.
Start a new cleaning cycle.
If the problem is not resolved through troubleshooting, first contact your
local retailer to request a diagnostic review, or contact Polaris Technical
Support at (USA)
1-800-822-7933; 1-888-647-4004 (Canada).
Check the pump cover for debris.
Check propellor for debris.
Clean the filter.
Start a new cleaning cycle.
If the problem is not resolved through troubleshooting, first contact your
local retailer to request a diagnostic review, or contact Polaris Technical
Support at (USA)
1-800-822-7933; 1-888-647-4004 (Canada).
Solution
Page 15