Environmental Information - GUTMANN LLANO Instrucciones De Montaje

6. Create a screwed connection between the
hood/cupboard fixture and the fitted cupboard
(1.), and then tighten the cupboard fixture on
the hood (2.).
7. Direct the exhaust air hose and the
electrical line connection to the hood. Pay
attention that the exhaust air hose is installed
without kinks. Fasten the exhaust air hose to
the exhaust air connection using a hose
clamp.
8. Create the electrical connection between
the hood and the supply line.
9. In case of ceiling suspension by means
of threaded rods/hanger bolts: Use the
drilled fastening holes (X) at the top in the
hood body.
10. After completion of installation, carry
out a functional test.
Typ
32 EM 510x280 =
32 EM 810x280 =
32 EM1110x280=
Option: with mounting frame page 35
Attachment points for threaded rods
32 EM 510x280 L: = 280 B: = 200
32 EM 810x280 L: = 500 B: = 200
32 EM1110x280 L: = 500 B: = 200
Disposal Packaging
The appliance packaging is recyclable.
Cardboard and polyethylene film (PE) are
used as packaging material. These materials
must be disposed of in an environmentally
friendly manner and in accordance with the
currently valid on-site regulations

Environmental Information

This appliance is labelled in accordance with
European Directive 2002/96/EG conceming
used electrical and electronic appliances
(waste electrical and eleclronic equipment -
WEEE). The guideline determines the
framework for the return and recycling of
used appliances as applicable throughout
the EU. Please ask your dealer about current
means of disposal.
cutout dimensions
490 x 254mm
790 x 260mm
1090 x 260mm
en