Descargar Imprimir esta página

Adjusting The Lawn Mower For The User - Stihl RMA 443 C Manual De Instrucciones

Ocultar thumbs Ver también para RMA 443 C:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65

8 Adjusting the Lawn Mower for the User

► Guide upper handlebar (2) into handlebar
bracket (4).
► Push bolt (5) through the bores in handlebar
bracket (4) and the sleeve in upper handle‐
bar (2).
► Place nut (6) in the notch in handlebar
bracket (4).
► Tighten bolt (5).
► Press cable (7) into holders (8).
► Fasten cable (7) to the handlebar using cable
clip (9).
The handlebar must not be dismantled again.
7.2
Assembling, Attaching and
Detaching the Grass Catcher
Box
7.2.1
Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
0478-131-9946-D
► Press pins (3) through openings (4) from the
inside.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
7.2.2
Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach to mounts (5) using
hooks (4).
► Set down discharge flap (1) on grass catcher
box (2).
7.2.3
Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
8
Adjusting the Lawn Mower
for the User
8.1
Adjusting the Handlebar
► Switch the lawn mower off, pull out the activa‐
tion key and remove the battery.
► Place the lawn mower on a level surface.
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Move handlebar (1) into the desired position.
English
31

Publicidad

loading