Adding Engine Oil; Refuelling The Lawn Mower; Adjusting The Lawn Mower For The User; Folding Up The Handlebar - Stihl RM 448 VC Manual De Instrucciones

Ocultar thumbs Ver también para RM 448 VC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56

7 Refuelling the Lawn Mower

6.2.2
Attaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach with lug (4) in discharge
chute (5) and hooks (6) in mountings (7).
► Set down discharge flap (1) on grass catcher
box (2).
6.2.3
Detaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
6.3

Adding Engine Oil

The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be
found in the engine instruction manual.
NOTICE
■ The lawn mower does not contain any engine
oil on delivery. Starting the engine with no or
too little engine oil may damage the lawn
mower.
► Always check the engine oil level before
starting and if necessary top up.
► Add the engine oil as described in the engine
instruction manual.
7
Refuelling the Lawn Mower
7.1
Refuelling the Lawn Mower
NOTICE
■ The lawn mower may be damaged if the cor‐
rect fuel is not used.
► See the engine instruction manual.
► Stop the engine.
► Place the lawn mower on a level surface.
0478-111-9904-A
► Clean the area around the fuel tank cap with a
damp cloth.
► Turn fuel tank cap (1) anti-clockwise until it
can be removed.
► Remove the fuel tank cap.
► Add fuel, stopping at least 15 mm short of the
fuel tank brim.
► Place the fuel tank cap on the fuel tank.
► Turn the fuel tank cap clockwise and tighten
firmly by hand.
The fuel tank is sealed.
8
Adjusting the Lawn Mower
for the User
8.1

Folding Up the Handlebar

► Stop the engine.
► Detach the spark plug socket.
► Place the lawn mower on a level surface.
► Lift handlebar (1).
► Press lever (2) downwards and hold.
► Fold up handlebar (1), ensuring that
cables (3 4 and 5) are not trapped.
English
29

Publicidad

Tabla de contenido
loading

Tabla de contenido